INSTALLATION GUIDE
How to Apply
Before you start:
Wash your hands before applying the graphic “your hands can contain oils and dirt that can get onto your graphic causing bubbles or bumps”. Gather the required tools before applying your graphic includes rubbing alcohol, paper towel, masking tape, level or measuring tape and a squeegee.
Step 1:
Clean surface of debris, dust, and moisture using rubbing alcohol and paper towel.
Step 2:
Place graphic in desired position using masking tape.
Step 3:
Use a level or measuring tape to make sure your graphic is straight and in position.
Step 4:
Create a “Hinge” using masking tape across the top of your graphic.
Step 5:
Lift the graphic at the “hinge” and peel backing paper down half way.
Step 6:
Fold graphic down into desired position do not let adhesive contact surface until ready.
Step 7:
Remove air behind graphic and press adhesive into surface using squeegee from top to bottom.
Installation Video
Here, we will show you how to install and apply your graphic just follow this how to apply video guide.